Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
NSN
Número de acciones nacionales:
TXT
Descripción:
Hub Clamp
Código de nombre del artículo:
27781
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.188 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.750 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 1.365 inches and 1.375 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 1.1240 inches and 1.1250 inches
MRC:
The length of a straight line which passes through the center of a plain hole,and terminates at the circumference.ADCQ
Plain Hole Diameter:
0.4530 inches
Distance From Bore Centerline To End:
1.031 inches
MRC:
The style designation indicating a configuration that most nearly corresponds to the hole/s/ provided for securing the clamp.AHYJ
Clamp Securing Hole Style:
Threaded
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.438 inches
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches both bearing flats
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel federal standard 66, aisi/sae 1018 or steel federal standard 66, aisi/sae 1020 or steel federal standard 66, aisi/sae 1022
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018 or steel comp 1020 or steel comp 1022
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal standard 1ST material response or aisi 1018 assn standard single material response or sae 1018 assn standard single material response and federal standard 66 federal standard 2ND material response or aisi 1020 assn standard single material response or sae 1020 assn standard single material response and federal standard 66 federal standard 3RD material response or aisi 1022 assn standard single material response or sae 1022 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular, single bolt secured
