Número de pieza 553030

Shaft Collar

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 119.44 and 161.244 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
553030
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
005299998

Información de la pieza
Largest diameter end counterbored 1.281 in Diameter and 0.047 in Deep and with 2ND counterbore 0.895 to 0.900 in Diameter and 0.250 in Deep

NSN
Número de acciones nacionales:
3040-00-529-9998 3040005299998
TXT
Descripción:
Shaft Collar
INC
INC
Código de nombre del artículo:
13743
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.375 inches
MRC:
A measurement taken at right angles to the length of an internal keyway,in distinction from thickness.ABLM
Internal Keyway Width:
Between 0.191 inches and 0.195 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.500 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the circumference.ABPH
Small End Diameter:
1.875 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.8760 inches and 0.8800 inches
MRC:
None.AEUZ
Largest Diameter Length:
0.125 inches
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
2
MRC:
The distance from the center of the bore to the bottom of the keyway(s).AEVF
Distance From Center Of Bore To Bottom Of Keyway:
Between 0.560 inches and 0.566 inches
MRC:
A measurement of the amount of turning necessary to bring one keyway into coincidence with another,expressed in degrees.AEVJ
Keyway Spacing In Deg:
180.0
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel federal standard 66, aisi/sae 4615
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4615
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal standard single material response or aisi 4615 assn standard single material response or sae 4615 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round stepped

Similar Shaft Collars

« Miscellaneous Power Transmission Equipment Catálogo
Comparar ahora»
Claro | Esconder