Número de pieza 5360-615-1953

Compression Helical Spring
Disponibilidad de stock  Códigos de condición del producto

Número de pieza 5360-615-1953 está en stock en las siguientes cantidades y condiciones.

  • NE: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 11/13/2023 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 190.5 and 257.175 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
5360-615-1953
Desmilitarización:
Yes - DEMIL/MLI
Vigencia:
N/A
Unidad de medida:
10 EA
NIIN:
006151953

Información de la pieza
Hook 0.313 to 0.323 in Lg by 0.151 to 0.156 in Radius by 0.300 in W located at end of one end coil

NSN
Número de acciones nacionales:
5360-00-615-1953 5360006151953
TXT
Descripción:
Compression Helical Spring
INC
INC
Código de nombre del artículo:
04226
INC
COM
Conformidad:
* ITAR Controlled
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 2.500 inches and 2.530 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end squared and ground both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Spring end squared and ground both ends
MRC:
A measurement taken at right angles to the length of the stock,in distinction from thickness.ACVV
Stock Width:
0.306 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Recoil mechanism 105-MM, M2A5
MRC:
None.AGEK
Spring Free Length:
Between 2.875 inches and 3.125 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
4
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 325.00 pounds and 375.00 pounds
MRC:
None.AXJQ
Spring Solid Length:
1.250 inches
MRC:
None.AXJR
Spring Solid Outside Diameter:
3.612 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
228.000 pounds per inch
MRC:
None.AXLQ
Spring Free Outside Diameter:
Between 3.112 inches and 3.142 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 6150 or steel comp 1095
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-S-624-CANCELED federal specification all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical

Similar Compression Helical Springs

« Coil, Flat, Leaf and Wire Springs Catálogo
Comparar ahora»
Claro | Esconder