Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
53-39096-3
NSN
Número de acciones nacionales:
TXT
Descripción:
Headed Grooved Pin
Código de nombre del artículo:
02382
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Knurled no 4
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.3085 inches and 0.3100 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
1.471 inches
Undercut Diameter:
Between 0.288 inches and 0.292 inches
Under Head Length:
1.670 inches
Undercut Width:
Between 0.029 inches and 0.032 inches
Second Undercut Width:
0.120 inches
Second Undercut Diameter:
0.280 inches
First End Taper Length:
0.060 inches
First End Taper Angle:
60.0 degrees
Pin Head Diameter:
1.000 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.640 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MIL-S-5626, cond c military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
P.S.18021 type 2, cl 3, 76301 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
