Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
NSN
Número de acciones nacionales:
TXT
Descripción:
Bevel Gear
Código de nombre del artículo:
05463
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain solid
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
15 both ends
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
2.0000 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
20
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Involute spline both ends
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.7500 inches both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
58.0 rockwell c and 62.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
2.1812 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.637 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Straight
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the pitch angle on the item.CWQD
Pitch Angle:
38.6597 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
1.030 inches second end
MRC:
A nominal measurement between specified points on the recess of the body,in distinction from height.CWRB
Body Recess Depth:
0.2270 inches first end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.440 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.835 inches both ends
MRC:
A nominal measurement between specified points of the counterbore,in distinction from height.CWTB
Counterbore Depth:
0.410 inches second end
MRC:
The nominal length of a straight line which passes through the center of the counterbore,and terminates at the circumference.CWTG
Counterbore Diameter:
0.9400 inches second end
MRC:
The nominal length of a straight line which passes through the center of the end of the item,and terminates at the circumference.CWWN
End Diameter:
1.248 inches second end
MRC:
A nominal measurement taken at right angles to the length of the first groove,in distinction from thickness.CWXY
First Groove Width:
0.160 inches second end
MRC:
The nominal length of a straight line which passes through the center of the first groove,and terminates at the circumference.CWYD
First Groove Diameter:
1.160 inches second end
MRC:
The nominal distance from the end of the item to the first groove.CWYL
Distance From End To First Groove:
0.810 inches second end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8615 or steel comp 8620 or steel comp 8720
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8615 or steel comp 8620 or steel comp 8720
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-S-624 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Peripheral face back hub protruding
