Número de pieza 524989

Key Washer

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 3.84 and 5.184 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
524989
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
10 EA
NIIN:
009432477

Información de la pieza
Inside diameter has flat surface with round top edges 0.020 in Min 0.040 in Maximum high parallel to outside edge of key 0.275 in Min 0.285 in Maximum flat to center distance

NSN
Número de acciones nacionales:
5310-00-943-2477 5310009432477
TXT
Descripción:
Key Washer
INC
INC
Código de nombre del artículo:
01869
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.695 inches and 0.705 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.080 inches
MRC:
None.ABLD
External Tapered Key Width:
Between 0.540 inches and 0.560 inches
MRC:
None.ABLH
Tapered Key Major Width:
Between 0.270 inches and 0.280 inches
MRC:
None.ABLX
Overall Distance Including Keys:
1.400 inches
MRC:
None.ABMQ
External Key Quantity:
4
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.058 inches and 0.059 inches
MRC:
None.CSFW
Angle Between External Keys:
Between 78.0 degrees and 82.0 degrees
MRC:
None.CSKN
External Prebent Key Angle:
Between 10.0 degrees and 20.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches bottom
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches top
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 305
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5514 assn standard single material response

Similar Key Washers

« Nuts and Washers Catálogo
Comparar ahora»
Claro | Esconder