Número de pieza 5140937

Headed Shoulder Pin

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 3.9 and 5.265 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
5140937
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
2 EA
NIIN:
005140937

Información de la pieza
Hole on 0.312 inC from bottom ofhead 0.2485 in Min 0.2495 in Maximum dia lower portion of first shoulder threaded 0.937 in Min 0.999 in maxLg thd 3/4-10NC-2 thd hole on 0.125 inC from end of shank 0.141 inDia pin BFDX2, 505521 press fitted into hole nearhead

NSN
Número de acciones nacionales:
5315-00-514-0937 5315005140937
TXT
Descripción:
Headed Shoulder Pin
INC
INC
Código de nombre del artículo:
16563
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
None.ABPB
Under Head Length:
5.531 inches
MRC:
None.ABPR
First Step Diameter:
Between 0.743 inches and 0.748 inches
MRC:
None.ABPS
First Step Length:
5.281 inches
MRC:
None.ABPT
Second Step Diameter:
0.562 inches
MRC:
None.ABPU
Second Step Length:
0.250 inches
MRC:
The measured distance from a fixed point to a variable point on a curve or curved surface.ALWR
First End Corner Radius:
0.031 inches
MRC:
None.CRRG
Pin Head Diameter:
1.375 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.375 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018 and steel comp 1020
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder

Similar Headed Shoulder Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder