Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
505001-000item
NSN
Número de acciones nacionales:
TXT
Descripción:
Dust And Moisture Seal Boot
Código de nombre del artículo:
19302
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2B
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.176 inches
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
Dustproof-nema type 13 and watertight-nema type 4
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.844 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.053 inches
Dome Height:
0.791 inches
MRC:
The number of mounting devices used as a means of attaching the item.ACUP
Mounting Device Quantity:
1
MRC:
The means by which the item is sealed.ACUW
Sealing Method:
Compression
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.625 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Integral threaded nut
MRC:
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.BGKC
Opening Inside Diameter:
0.125 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Uns
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.469 inches
MRC:
Indicates the location of the thread on the base.CSFT
Base Thread Location:
Internal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Closed end
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-MIL-B-5423 specification (includes engineering type bulletins brochures etc that reflect specification type data in specification format excludes commercial catalogs industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical" "average" "" etc)
