Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
5037m72p01
Información de la pieza
Handle 0.25 in Od 0.19 in H hole through side 0.045 - 0.050 in Diameter 0.095 in From top
NSN
Número de acciones nacionales:
TXT
Descripción:
Access Cover
Código de nombre del artículo:
29785
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular recess
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.374 inches and 0.381 inches
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Between 0.621 inches and 0.623 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.052 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.755 inches and 0.760 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Round no holes
Pilot Height:
0.280 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cdp transducer 9113M58, ab fuel control 7086M35 for F101 aircraft engine
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Handle for opening lifting closing or the like and sealing capability
Inside Angle:
Between 118.0 degrees and 122.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
AMS4117 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
