Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Both bore ends countersunk; 1ST end 2.057 in Diameter by 43.0 deg second end 1.957 in Diameter by 43.0 deg gear pitch dia 3.191 nom in gear face width 0.742 nom in gear pressure angle 1ST end 20 deg 2ND end 18.4894 deg left gear gear tooth 19 and 22 degrees angle and 2ND helix angle 23.9333 deg gear pitch 0.265 nom in
NSN
Número de acciones nacionales:
TXT
Descripción:
Gear Cluster
Código de nombre del artículo:
36636
MRC:
Indicates the design type of the item.APGF
Design Type:
Helical second gear
MRC:
Indicates the design type of the item.APGF
Design Type:
Spur first gear
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.080 inches second gear
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
4.070 inches first gear
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.250 inches between first and second gear
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.405 inches second end
MRC:
A nominal measurement between specified points on the bore,in distinction from height.CWRX
Bore Depth:
2.250 inches second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain between second and third gear
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
2.250 inches between first and second gear
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
2.250 inches between second and third gear
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66, aisi/sae 8620H federal standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Silver
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Idler gear cluster appl
