Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
436290-001
Información de la pieza
Passivated QQ-P-35 type ii
NSN
Número de acciones nacionales:
TXT
Descripción:
Straight Shaft
Código de nombre del artículo:
22109
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Cross drilled and circular grooved
First End Groove Width:
0.0290 inches
First End Groove Diameter:
0.2100 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Cross drilled and circular grooved
Second End Groove Width:
0.0290 inches
Second End Groove Diameter:
0.2100 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.690 inches
First End Distance From End To Groove:
0.225 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.2497 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.0620 inches
First End Distance From Hole Center To End:
0.370 inches
MRC:
A measurement between specified points of the hole at the first end,in distinction from height.AMEB
First End Hole Depth:
0.250 inches
Second End Distance From End To Groove:
0.230 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.2497 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.0620 inches
Second End Distance From Hole Center To End:
0.370 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-S-764 federal specification single material response
