Número de pieza 4070977

Headed Grooved Pin

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 291.88 and 394.038 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
4070977
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
013191218

Información de la pieza
Basic rectangular head 0.390 in Min and 0.400 in Maximum one end has a radius of 23 degrees min and 27 degrees maximum 0.140 in Min and 0.150 in Maximum in length

NSN
Número de acciones nacionales:
5315-01-319-1218 5315013191218
TXT
Descripción:
Headed Grooved Pin
INC
INC
Código de nombre del artículo:
02382
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round w/wrench flats chamfered
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.187 inches and 0.189 inches
MRC:
None.ABPA
Undercut Diameter:
Between 0.169 inches and 0.177 inches
MRC:
None.ABPB
Under Head Length:
Between 5.770 inches and 5.790 inches
MRC:
None.ABPC
Undercut Width:
Between 0.010 inches and 0.020 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F100PW0229 engine/aug mod
MRC:
None.AMCS
First End Taper Length:
Between 0.105 inches and 0.115 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.204 inches and 0.220 inches
MRC:
None.CRMG
First End Taper Angle:
Between 28.0 degrees and 32.0 degrees
MRC:
None.CRRG
Pin Head Diameter:
Between 0.530 inches and 0.550 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches shank end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.075 inches and 0.085 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 718
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5663 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

Similar Headed Grooved Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder