Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Head-two corners at same end chamfered 45.0 deg 0.060 to 0.080 in opposite face (width) curved
NSN
Número de acciones nacionales:
TXT
Descripción:
Headed Straight Pin
Código de nombre del artículo:
02384
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
L shape
MRC:
A measurement of the longest dimension of a head,in distinction from width.AASV
Head Length:
0.625 inches
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
Between 0.030 inches and 0.040 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.248 inches and 0.249 inches
Under Head Length:
Between 0.705 inches and 0.725 inches
MRC:
A measurement taken at right angles to the length of a head,in distinction from thickness.ABQX
Head Width:
Between 0.390 inches and 0.410 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
W/s: aircraft eagle F-15; aircraft F-16; engine aircraft F100-PW-200 (F-16A/B/C/D); engine aircraft F100-PW-100 (F-15A/B/C/D); support equipment C-5 aircraft engine aircraft F100-PW-220 (F-15C/D/E); aircraft F-111; advanced air traffic contr & land Sys (atcals) 404L
Pin Chamfer Angle:
Between 40.0 degrees and 50.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches shank end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.040 inches and 0.045 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5744 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
