Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Inner race bore is a spur gear data is 116 internal teeth diam pitch 3, pressure angle 20 deg pitch diameter 38.666IN. Min 38.674 in Max id 38.263 in Min 38.266 in Max no backlash allow agma quality no 0.004 tct with -a- 10, measure between wires 38.2217 in Min 38.2217 in Min 38.2297 in Max wire diam 0.480, surface finish on active profile of gear 80 microinches; 2 lubrication fittings reqd at 180 degrees apart including 1 in Loading plug ALEMITE-1627B or equal
NSN
Número de acciones nacionales:
TXT
Descripción:
Annular Ball Bearing
Código de nombre del artículo:
00014
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 3.4170 inches and 3.4370 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
39.6200 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 46.8720 inches and 46.8750 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/mst-ti
Outer Ring Width:
2.5670 inches
Inner Ring Width:
2.9700 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Unground
MRC:
The number of seals included on the item.AGYJ
Seal Quantity:
2
MRC:
Indicates the type of seal provided with the bearing.AGYW
Bearing Seal Type:
Contact
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Radial
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
MIL-G-23827 military specification single material response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp E52100 ball
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel inner race
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel outer race
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel spacer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
AISI1552 assn standard 1ST material response inner race
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
AISI1552 assn standard 2ND material response outer race
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Counterbored outer ring non-separable
