Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Desmilitarización:
Yes - DEMIL/MLI
NSN
Número de acciones nacionales:
TXT
Descripción:
Nonvehicular Clutch Disk
Código de nombre del artículo:
52059
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness (non-core):
Between 0.068 inches and 0.076 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness (non-core):
0.014 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter (non-core):
6.812 inches
MRC:
A measurement taken at right angles to the length of the lug,in distinction from thickness.AHMM
Lug Width (non-core):
Between 0.452 inches and 0.458 inches
MRC:
The angle between the lugs,expressed in degrees.AJAS
Angle Between Lugs In Deg (non-core):
60.000
MRC:
Indicates the design type of the item.APGF
Design Type:
Wet
MRC:
Indicates the location of the item to which a specific material is applicable.AQQF
Material Location (non-core):
Both sides
MRC:
The physical configuration of the item.ARJD
Design Form (non-core):
Solid
MRC:
Indicates the type of disk.BPLM
Disk Type:
External lug
MRC:
The length of a straight line which passes through the center of the material,and terminates at the outside circumference.BSPG
Material Outside Diameter (non-core):
Between 6.342 inches and 6.352 inches
MRC:
The length of a straight line which passes through the center of the material,and terminates at the inside circumference.BSPH
Material Inside Diameter (non-core):
Between 3.240 inches and 3.260 inches
MRC:
The means by which the facing is attached.BSPL
Facing Attachment Method (non-core):
Bonded
MRC:
The smallest length of a straight line which passes through the center of the two surfaces of a circular item,and terminates at the inside circumference.BSPX
Smallest Inside Diameter (non-core):
3.240 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data (non-core):
Ship and boat propulsion components
