Número de pieza 3LO-453C3

Inertia Switch
Disponibilidad de stock  Códigos de condición del producto

Número de pieza 3lo-453c3 está en stock en las siguientes cantidades y condiciones.

  • NE: 1
  • AR: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 02/20/2025 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards
Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
3lo-453c3
Desmilitarización:
No
Vigencia:
Unidad de medida:
NIIN:
015203392

Información de la pieza
Sensitivity hemispherical, latching g range 2 - 20 g's porm 10 pct insulation resistance 500 megs min at 500 vdc contact rating 5 amps at 28 vdc 5 amps at 125 vac contact resistance less than 0.5 ohms manual push button reset spst contact type termination connector MIL-C-26482, ser 1; seal hermetica 1.0E-5 cc/sec 90 nitrogen 10 pct helium altitude method 500.3-PROC 1; high temp method 501.3 proc 1 and 2, low temp method 502.3 proc 1 and 2; temp shock method 503.3 proc 1 and 2; humidity method 507.3 proc 1 cycle 1; salt fog method 509.3 proc 2; sand and dust method 510.3 proc 1 and 2 for 4 hours explosive atmos method 511.3 proc 1; vibration method 514.2; shock method 516.2 proc 1

NSN
Número de acciones nacionales:
5930-01-520-3392 5930015203392
TXT
Descripción:
Inertia Switch
INC
INC
Código de nombre del artículo:
02016
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.500 inches
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
1.200 inches
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
2.630 inches
MRC:
The shortest distance between mounting centers parallel to the horizontal plane.AFDT
Shortest Horizontal Distance Between Mounting Centers:
1.750 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
The general configuration and relative position of the facilities provided for mounting the item.CQYJ
Mounting Facility Pattern:
Four position rectangular
MRC:
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.CTZB
Contact Voltage Rating In Volts:
125.0 ac at altitude second voltage
MRC:
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.CTZB
Contact Voltage Rating In Volts:
28.0 dc at altitude first voltage
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular w/mounting lugs
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Calibration setting is adjusted when the units are mounted flat for upward and downward acceleration sensing the unit is to be mounted at 45 deg when mounted at 45 degrees the acceleration trigger level will obey the law of cosines axes unidirectional

Similar Inertia Switches

« Switches Catálogo
Comparar ahora»
Claro | Esconder