Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
One 0.0625 inDrilled hole located 180 degrees from keyway and 0.6562 inFrom first hub end
NSN
Número de acciones nacionales:
TXT
Descripción:
Spur Gear
Código de nombre del artículo:
05466
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
3.5000 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
35
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
10A w/ keyway both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
W/ keyway both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
27.0 rockwell c teeth and 31.0 rockwell c teeth
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
27.0 rockwell c and 31.0 rockwell c teeth
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.698 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.094 inches
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.281 inches first end
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.063 inches second end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.750 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
2.335 inches both ends
MRC:
A nominal measurement taken at right angles to the length of a keyway,in distinction from thickness.CWSN
Keyway Width:
0.188 inches both ends
MRC:
The nominal distance from the center of the bore to the bottom of the keyway(s).CWSR
Distance From Bore Center To Keyway Bottom:
1.266 inches both ends
MRC:
A nominal measurement between specified points of the counterbore,in distinction from height.CWTB
Counterbore Depth:
0.156 inches first end
MRC:
The nominal length of a straight line which passes through the center of the counterbore,and terminates at the circumference.CWTG
Counterbore Diameter:
2.625 inches first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain both ends
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
3.000 inches second end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
3.125 inches first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1040
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response and aisi/sae 1040 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Protruding hubs
