Número de pieza 3C24879-101

Square Plain Nut

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 321.94 and 434.619 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
3c24879-101
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
000228379

Información de la pieza
Nut side corners rounded to 2.060 in Diameter and 4 safety wire holes 0.069 in Min 0.074 in Maximum drilled at 45.0 degrees on face of nut 0.120 in From outside edge in center of rounded corners

NSN
Número de acciones nacionales:
5310-00-022-8379 5310000228379
TXT
Descripción:
Square Plain Nut
INC
INC
Código de nombre del artículo:
01858
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3B
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Square
MRC:
None.ADEA
Nut Height:
0.380 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.940 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Un
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.750 inches
MRC:
Indicates the type of bearing surface.CRTM
Bearing Surface Type:
Washer faced
MRC:
Designates the specific roughness rating of the bearing surface,representing the arithmetic average deviation of the surface from the meanline in profile.CSXL
Bearing Surface Finish:
250.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MIL-S-6758, cond D4 military specification single material response

Similar Square Plain Nuts

« Nuts and Washers Catálogo
Comparar ahora»
Claro | Esconder