Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
3a2-202a
NSN
Número de acciones nacionales:
TXT
Descripción:
Linear Electrical Resolver
Código de nombre del artículo:
31780
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Standard round rotatable housing
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
1.7500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.6380 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
1.8500 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.1250 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
1.6000 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
0.3380 inches single shaft
MRC:
The identifying part number assigned to the electrical connector receptacle.AEEF
Connector Manufacturer Part Number:
MS27471Y11E35P
MRC:
An alpha and/or numeric designation indicating the size by which the body is identified.AJSL
Body Size:
19
MRC:
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.AJSR
Rotor Input Voltage Rating In Volts:
12.0
MRC:
The cycles per second /hertz/ of the alternating current.AJSS
Frequency In Hertz:
3000.0
MRC:
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.AJVH
Maximum Total Null Voltage Output In Millivolts Per Volt:
25.00
MRC:
The number of individual teeth on the splined portion of the shaft.AJVM
Spline Tooth Quantity:
16 single shaft
MRC:
The rated excursion of angular measurement of that part of total rotational travel in which the output characteristic changes at a rate in direct proportion to the angular primary to secondary orientation changes,expressed in degrees.AJVP
Maximum Linear Range In Deg:
-35.0/+35.0
Shoulder Length:
0.0700 inches
Mounting Surface To Terminal End Distance:
2.2300 inches
MRC:
The number of teeth the splined shaft has per inch of pitch diameter.AJXA
Spline Tooth Diametral Pitch:
48 single shaft
MRC:
Indicates the location of the terminal/s/ on the item.CQTM
Terminal Location:
Side
MRC:
Indicates the type of shaft included on the item.CRSJ
Shaft Type:
Spline single shaft
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
1 connector plug
