Número de pieza 375-40-45-26

Headless Shoulder Pin

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 1984.931 and 2595.679 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
375-40-45-26
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
No qup EA
NIIN:
012958806

Información de la pieza
Drill 0.344 in diameter 3.562 inch depth longitudinal hole in shoulder end on axial center intersecting 0.344 inch diameter perpendicular hole tap with 0.125 national pipe thread two symmetrical grooves parallel to shoulder end 0.750 inch from end 0.344 inch wide by 0.500 inch deep keyway 0.312 inch wide 0.156 inNom depth 1.188 inches length with a full radius corner on longitudinal centerline in shank shank threaded for tn 12 timken locknut

NSN
Número de acciones nacionales:
5315-01-295-8806 5315012958806
TXT
Descripción:
Headless Shoulder Pin
INC
INC
Código de nombre del artículo:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered and counterbored
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.750 inches
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.750 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 2.3745 inches and 2.3750 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 2.352 inches and 2.360 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.562 inches
MRC:
None.ABPC
Undercut Width:
0.125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.344 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
3.375 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.125 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
18
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Threaded end
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shoulder outside diameter
MRC:
None.CTHC
Second End Taper Angle:
45.0 degrees
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Undercut

Similar Headless Shoulder Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder