Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Supplied w/two 1/2 in By 1/2 in Setscrews and two 1/2 in By 3/4 in Setscrews width: 0.375 in connection end type: hub
NSN
Número de acciones nacionales:
TXT
Descripción:
Vehicular Universal Joint
Código de nombre del artículo:
52079
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.688 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.250 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.500 inches
MRC:
Indicates the type of bearings furnished.ACSK
Bearing Type:
Needle
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
3.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
ERR-090
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1
MRC:
An indication of whether or not the hub end is threaded.BSYJ
Hub End Thread Provision:
Unthreaded
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
An indication of whether or not a hub securing hole is included.BTBM
Hub Securing Hole:
Included
MRC:
Indicates the location of the securing hole on the item.BTBN
Securing Hole Location:
One hole located on top of keyway one hole located 90 degrees from keyway
MRC:
Designates the thread diameter and number of threads per measurement scale for a threaded securing hole(s).BTBQ
Securing Hole Thread Size Designator:
1/2-13
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
Distance From Centerline To Keying Facility:
1.031 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
ERR-090
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Cold elevator tumbling drive shaft assembly vehicular
