Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
3171936-1
Desmilitarización:
Yes - DEMIL/MLI
Información de la pieza
Both ends drilled and countersunk axially
NSN
Número de acciones nacionales:
TXT
Descripción:
Shouldered Shaft
Código de nombre del artículo:
22914
First End Groove Width:
Between 0.0940 inches and 0.1040 inches
First End Groove Diameter:
Between 0.1360 inches and 0.1380 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 7.880 inches and 7.910 inches
First End Distance From End To Flat:
Between 0.340 inches and 0.350 inches
First End Distance From End To Groove:
Between 0.976 inches and 1.116 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.2481 inches and 0.2490 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.1630 inches and 0.1720 inches
First End Distance From Hole Center To End:
Between 1.8120 inches and 1.8420 inches
MRC:
A measurement between specified points of the hole at the first end,in distinction from height.AMEB
First End Hole Depth:
Between 0.200 inches and 0.220 inches
First End Grooved Flat Length:
Between 0.2600 inches and 0.2800 inches
First End Grooved Flat Depth:
Between 0.0331 inches and 0.0340 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.4991 inches and 0.4996 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1630 inches and 0.1720 inches
Second End Distance From Hole Center To End:
3.100 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
Between 0.200 inches and 0.220 inches
Second End Angle Between Holes:
57.0 degrees
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.499 inches and 0.500 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 347
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-S-763 federal specification single material response or ams 5646 assn standard single material response
