Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Item has extra connection on side below bonnet thd ext
NSN
Número de acciones nacionales:
TXT
Descripción:
Angle Valve
Código de nombre del artículo:
05483
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A 2ND end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand 2ND end
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Plug
MRC:
Indicates the type of housing on the item that accommodates the stem packing or spring.ADSR
Bonnet Type:
Inside screw
MRC:
The means by which the bonnet is attached to the item.ADST
Bonnet Attachment Method:
Integral
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2 1ST end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
G42 flared (tube) 2ND end
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
1.366 inches 1ST end
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
2.426 inches 1ST end
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Manual
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Oval with holes 1ST end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 1ST end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded external tube 2ND end
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
250.0 pounds per square inch single response
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.875 inches 2ND end
MRC:
The angle of the end surface upon which the mated surface seats.CQRB
Seat Angle:
37.0 degrees 2ND end
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.308 inches 1ST end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.342 inches 1ST end
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
1.610 inches 1ST end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Plain swivel 1ST end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air single response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
ERR-090
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf 2ND end
