Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
3016t25p01
Información de la pieza
Single ridge parallel to outer edge at a distance of 0.040 in Min and 0.050 in Max double ridge w/ diameter min 1.410 in And maximum 1.430 in Situated 0.040 in Min and 0.050 in Maximum from circumference of aperture
NSN
Número de acciones nacionales:
Código de nombre del artículo:
04522
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.208 inches and 0.218 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.040 inches and 2.080 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.660 inches and 1.700 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 1.310 inches and 1.330 inches
Outside Corner Radius:
Between 0.260 inches and 0.280 inches
MRC:
The center to center distance.ADQR
Center To Center Distance:
Between 0.040 inches and 0.050 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.140 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.520 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.260 inches and 0.280 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.260 inches and 0.280 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.018 inches
MRC:
A measurement of the smallest dimension of the gage, in distinction from length or width.ADWG
Gage Thickness:
Between 0.008 inches and 0.012 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5510 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
