Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Outlet bilge tube
NSN
Número de acciones nacionales:
TXT
Descripción:
Tube Outlet
Código de nombre del artículo:
28336
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
1 all ends
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-458-7318; assault vehicle full tracked amphibious
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
3.00 inches center bulkhead
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
6.38 inches center bulkhead
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Oval with holes 1ST end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 1ST end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Unthreaded tube w/formed end 2ND end
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
40000.0 pounds per square inch
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
24000.0 pounds per square inch
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.495 inches all ends
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
2.562 inches all ends
MRC:
The design of the flange face.CWDF
Flange Face Design:
Plain 1ST end
MRC:
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.CWDW
Inside Diameter Hose Accommodated:
2.562 inches 2ND end
MRC:
The nominal thickness of the tubing wall for which designed as taken from the inside surface to the nearest outer surface.CWFK
Tubing Wall Thickness For Which Designed:
5.375 inches 2ND end
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
H-321 strain hardened and H-32 strain hardened stabilized to 1/4 hard
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5043 or aluminum alloy 5045 flange
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052 or aluminum alloy 5086 tube
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-A250/6 military specification 1ST material response or QQ-A-250/7 military specification 1ST material response flange
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-T-700/4 military specification 2ND material response or QQ-T-700/5 military specification 2ND material response tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Elbow
