Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Hub machined surface finish outside length: 3.000 in first length and 3.250 in second length
NSN
Número de acciones nacionales:
TXT
Descripción:
Propeller Shaft With Universal J
Código de nombre del artículo:
52091
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
ERR-070 and ERR-070
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
ERR-070 and ERR-070
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
ERR-070 and ERR-070
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
3.500 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
66.906 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.AEDX
Shaft Style (non-core):
ERR-090
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
ERR-070 and ERR-070
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
ERR-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
ERR-090
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
ERR-070
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
ERR-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the universal joint.BTBT
Universal Joint Style:
C2
MRC:
Indicates the type and location of the end component(s).BTBX
End Component Type And Location:
Universal joint both ends
MRC:
Indicates the type of connection end(s) on the universal joint.BTCC
Universal Joint Connection End Type:
ERR-070
Shaft Facility Spline Quantity:
10
MRC:
The number of splines on the shaft.CZKU
Shaft Spline Quantity:
10
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Transmission to oil cooler vehicular
