Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
204-076-175-1
NSN
Número de acciones nacionales:
TXT
Descripción:
Fluid Passage Bolt
Código de nombre del artículo:
18683
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain
Concentric Hole Depth:
Between 1.120 inches and 1.180 inches
Concentric Hole Diameter:
Between 0.162 inches and 1.182 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.834 inches and 1.854 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
Flared
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.ADDV
Cotter Pin Hole Diameter:
Between 0.046 inches and 0.056 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.688 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
Between 0.318 inches and 0.344 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
MRC:
The distance measured along a line parallel to the longitudinal axis of the bolt end to hole center.BBKK
Distance From Bolt End To Hole Center:
Between 1.716 inches and 1.756 inches
First Diameter From Wrenching Feature:
Between 0.430 inches and 0.432 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 1.247 inches and 1.252 inches
First Radial Fluid Hole Diameter:
Between 0.162 inches and 0.182 inches
Distance From First Radial Hole Center To End Of Bolt:
Between 1.021 inches and 1.041 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
Between 1.646 inches and 1.666 inches
Wrenching Feature Height:
Between 0.143 inches and 0.203 inches
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
10000 pounds per square inch
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
20
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The angle of the end surface upon which the mated surface seats.CQPR
First End Seat Angle:
45.0 degrees
