Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
1c5601-2p04
Unidad de medida:
No qup EA
Información de la pieza
Long shank has medium diamond knurl shoulder end opposite groove chamfered 30 deg
NSN
Número de acciones nacionales:
TXT
Descripción:
Headless Shoulder Pin
Código de nombre del artículo:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.813 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 1.528 inches and 1.530 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 1.030 inches and 1.060 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 7.770 inches and 7.810 inches
Undercut Diameter:
Between 0.860 inches and 0.880 inches
Undercut Width:
0.312 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.344 inches and 0.351 inches
Distance From Centerline Of Hole To End Of Pin:
3.630 inches
First End Taper Length:
Between 0.040 inches and 0.060 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Casehardened
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
Second Shank Diameter:
Between 0.997 inches and 0.999 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches short shank end
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter
Second Shank Length:
Between 1.370 inches and 1.390 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi 8620 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Undercut
