Número de pieza 1989628-1

Shouldered Shaft

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 2318.96 and 3130.596 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
1989628-1
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
008335329

Información de la pieza
1ST end has 4 int Thd holes 0.190 in Diameter 0.750 in D 10 and 32 unf 2B thd des alt spaced at 60 and 120 degrees apart on 0.750 in Diameter bolt circle 2ND end 2ND crossdrilled hole distance between ctrs 0.500 in both holes counterbored 0.318 in Diameter 0.152 in D 2ND end flat grooved 0.558 in D and 0.840 in Lg 0.865 in From end

NSN
Número de acciones nacionales:
3040-00-833-5329 3040008335329
TXT
Descripción:
Shouldered Shaft
INC
INC
Código de nombre del artículo:
22914
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Cross drilled and circular grooved
MRC:
None.AAHW
Second End Groove Width:
0.0400 inches
MRC:
None.AAHX
Second End Groove Diameter:
0.5940 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.300 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.0400 inches
MRC:
None.AMFQ
Second End Distance From End To Groove:
0.275 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.6230 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.2040 inches
MRC:
None.AMGT
Second End Distance From Hole Center To End:
1.035 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.562 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.120 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-A-250, comp 2024, temper T4 federal specification single material response
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Automatic pilot servo controls

Similar Shouldered Shafts

« Miscellaneous Power Transmission Equipment Catálogo
Comparar ahora»
Claro | Esconder