Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
193701-0
NSN
Número de acciones nacionales:
TXT
Descripción:
Nonmetallic Hose Assembly
Código de nombre del artículo:
20311
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand 1ST end
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 1.938 inches and 2.062 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.375 inches 2ND end
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.750 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
1.875 inches 2ND end
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
0.188 inches 2ND end
MRC:
The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH
Minimum Inside Bending Radius:
12.000 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
2.813 inches 2ND end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Plain 1ST end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Recessed w/gasket groove 2ND end
MRC:
The design used in constructing the end portion of the flange.AKUT
End Flange Construction:
Solid 2ND end
MRC:
The physical configuration of the outside of the end connection.AKUU
End Connection Design:
Elbow 2ND end
MRC:
The physical configuration of the outside of the end connection.AKUU
End Connection Design:
Straight 1ST end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Recessed flange 2ND end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded external pipe 1ST end
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
2ND layer braided wire and outer layer molded rubber synthetic and 1ST layer braided textile yarn
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
2.000 inches 1ST end
MRC:
The angle that the flow is turned from the straight flow.CRFY
Flow Angle:
90.0 degrees 2ND end
MRC:
The type of protection provided by the outer covering.CRJM
Outer Covering Environmental Protection:
Oil resistant and ozone resistant
MRC:
The condition of the item with respect to the texture of the inner surface.CRWL
Inside Surface Condition:
Smooth
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
144.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Round w/ out bolt holes 2ND end
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Hydraulic fluid water base and fuel/oil hydrocarbon single response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Npt 1ST end
