Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
17-12776-1
Desmilitarización:
Yes - DEMIL/MLI
Información de la pieza
Silver plate flange faces only do not paint
NSN
Número de acciones nacionales:
TXT
Descripción:
Waveguide Assembly
Código de nombre del artículo:
00305
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Internal rectangular external rectangular
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2B third flange all connection facilities
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand third flange all connection facilities
MRC:
The angular measurement by which one part/section of a rigid item deviates from a straight line projection of an adjacent part/section,expressed in degrees.ACJL
Bend Angle In Deg:
90.0 first bend e-plane
MRC:
The angular measurement by which one part/section of a rigid item deviates from a straight line projection of an adjacent part/section,expressed in degrees.ACJL
Bend Angle In Deg:
90.0 second bend h-plane
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Landing control central AN/SPN-42
MRC:
The style designation indicating the configuration that most nearly corresponds to the construction of the tubing wall.AHRV
Tubing Wall Construction Style:
Seamless all tubing segment
MRC:
The number of flanges provided with the item.AHSF
Flange Quantity:
3
Flange Inside Width:
0.2786 inches second flange and 0.2814 inches second flange
Flange Inside Width:
0.2786 inches third flange and 0.2814 inches third flange
Flange Inside Width:
0.360 inches first flange and 0.364 inches first flange
Flange Inside Height:
0.1386 inches second flange and 0.1414 inches second flange
Flange Inside Height:
0.1386 inches third flange and 0.1414 inches third flange
Flange Inside Height:
0.220 inches first flange and 0.224 inches first flange
Flange Outside Width:
0.735 inches third flange and 0.765 inches third flange
Flange Outside Width:
0.745 inches first flange and 0.755 inches first flange
Flange Outside Width:
0.735 inches second flange and 0.765 inches second flange
Flange Outside Height:
0.745 inches first flange and 0.755 inches first flange
Flange Outside Height:
0.735 inches second flange and 0.765 inches second flange
Flange Outside Height:
0.735 inches third flange and 0.765 inches third flange
Flange Inside Diameter:
0.500 inches second flange
Flange Inside Diameter:
0.500 inches third flange
MRC:
A measurement between specified points on the flange,in distinction from height.AHTD
Flange Depth:
0.182 inches first flange and 0.192 inches first flange
MRC:
A measurement between specified points on the flange,in distinction from height.AHTD
Flange Depth:
0.195 inches third flange and 0.225 inches third flange
MRC:
A measurement between specified points on the flange,in distinction from height.AHTD
Flange Depth:
0.195 inches second flange and 0.225 inches second flange
MRC:
The length of a straight line which passes through the center of a flange connecting hole,and terminates at the circumference.AHTN
Flange Connecting Hole Diameter:
0.116 inches first flange all connection facilities and 0.118 inches first flange all connection facilities
MRC:
The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.AHTW
Voltage Standing Wave Ratio:
1.07
MRC:
The difference in the amount of energy available before and after the insertion of an apparatus in a transmission system,expressed in decibels.AHTX
Insertion Loss In Decibels:
0.20
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
40 third flange all connection facilities
Waveguide Outside Width:
Between 0.358 inches and 0.362 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.112 inches third flange all connection facilities
Waveguide Inside Width:
Between 0.2785 inches and 0.2815 inches
Waveguide Inside Height:
Between 0.1385 inches and 0.1415 inches
Waveguide Outside Height:
Between 0.218 inches and 0.222 inches
MRC:
The type and number of facilities by which the flange is connected.CSQT
Flange Connecting Facility And Quantity:
4 threaded hole third flange all connection facilities
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Choke type second flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Choke type third flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Cover type first flange
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid all tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy all tubing segment and flange
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Flange faces silver
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Silver
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer all tubing segment and flange outside surfaces and enamel all tubing segment and flange outside surfaces
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc third flange all connection facilities
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Antennas waveguides and related equipment
