Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
1529m97p01
NSN
Número de acciones nacionales:
TXT
Descripción:
Plate Spacer
Código de nombre del artículo:
26979
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.213 inches and 0.224 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.800 inches and 1.840 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.800 inches and 1.840 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 0.843 inches and 0.854 inches
Outside Corner Radius:
Between 0.220 inches and 0.280 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.294 inches and 0.300 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.312 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.312 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.244 inches and 0.264 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.244 inches and 0.264 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321 or steel comp 347
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5645 assn standard 1ST material response or ams 5646 assn standard 2ND material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/bolt holes
