Número de pieza 152147

Annular Ball Bearing

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 7.94 and 10.719 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
152147
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
007123106

Información de la pieza
Hod of inner ring flanged on one side 0.2440 in Maximum flange od 0.0770 in Flange width 0.051 in Wide by 0.049 in Deep slot in od of outer ring od corners and slot corners to have 0.016 in Maximum radius

NSN
Número de acciones nacionales:
3110-00-712-3106 3110007123106
TXT
Descripción:
Annular Ball Bearing
INC
INC
Código de nombre del artículo:
00014
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.2090 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.1130 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
0.4720 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Pressed
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Radial
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The designation specifying the type of fit as recognized by industrial and governmental agencies.AGZH
Internal Fit-up Designation:
Tight
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Od of inner ring flanged on one side 0.2440 in Maximum flange od 0.0770 in Flange width 0.051 in Wide by 0.049 in Deep slot in od of outer ring od corners and slot corners to have 0.016 in Maximum radius
MRC:
The chemical compound or mechanical mixture properties with which the item is lubricated.LBMA
Lubrication Material:
Grease
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
DOD-G-24508 military specification single material response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel

Similar Annular Ball Bearings

« Bearings Antifriction Unmounted Catálogo
Comparar ahora»
Claro | Esconder