Número de pieza 1382M66P05

Section Block Clamp

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 444.8 and 600.48 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
1382m66p05
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
No qup EA
NIIN:
012889915

Información de la pieza
Designed for a total compression gap of 0.050 in top side bevelled 14.5 degrees min 15.5 degrees maximum to intersection of 1.010 in Radius w/top surf

NSN
Número de acciones nacionales:
5340-01-288-9915 5340012889915
TXT
Descripción:
Section Block Clamp
INC
INC
Código de nombre del artículo:
39404
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.230 inches and 2.270 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.480 inches and 0.520 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.213 inches and 0.224 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
1
MRC:
None.AFEC
Distance From Center Of Mounting Hole To Edge Along The Width:
Between 0.240 inches and 0.260 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
0.968 inches
MRC:
The length of a straight line which passes through the center of the cable for which the item is designed,and terminates at the circumference.CBSM
Cable Diameter For Which Designed:
1.700 inches all holes
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
1
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
1.750 inches all holes
MRC:
None.CWXN
Distance From End To First Clamping Hole Center:
1.130 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5645 assn standard 1ST material response or ams 5646 assn standard 2ND material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular

Similar Section Block Clamps

« Commercial Hardware Catálogo
Comparar ahora»
Claro | Esconder