Número de pieza 134AVP20908-841

Access Cover

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 183.52 and 247.752 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
134avp20908-841
Desmilitarización:
Yes - DEMIL/MLI
Vigencia:
N/A
Unidad de medida:
1 AY
NIIN:
010686740

Información de la pieza
Itwo each reinforcement beads molded into top of cover dim typical for both beads l 11.500 inW 0.938 in.Protusion h 0.250 inLocated from side EDGE2.000 inTo center of bead-end of beadto edge of cover 1.000 inDrain hole-dia 0.147 located lower left hand corner in top upper end side has a rectangular slot opening-molded rolled flange with 0.125 inBend radius-protruding 0.188 inAbove end surface-dim of opening-w 3.000 in-d 2.000 inInside corner rad 0.250 inLocated 0.688 inFrom right hand side of cover to edge of slot lower end side has a slot opening-molded rolled flange with 0.125 inBend radius-protruding 0.188 inAbove end surface-dim of opening w 1.750 inDepth 1.875 inTo an inside end radius of slot 0.875 inSlot located 2.938 inFrom right hand side of cover to edge of slot upper right hand side of cover has a slot opening located 0.438 inFromedge of slot to top edge of cover-dim of slot w 1.188 inD 2.375 inWith inside corner rad 0.250 in

NSN
Número de acciones nacionales:
5340-01-068-6740 5340010686740
TXT
Descripción:
Access Cover
INC
INC
Código de nombre del artículo:
29785
INC
COM
Conformidad:
* ITAR Controlled
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recess same shape as the periphery
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.217 inches and 0.223 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
9.313 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.040 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
13.938 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.062 inches
MRC:
None.ADNY
Distance Between Holes Along Length:
11.250 inches
MRC:
None.ADNZ
Distance Between Holes Along Width:
9.000 inches
MRC:
None.ADPC
Distance From First Hole Centerline To End Along Length:
1.125 inches
MRC:
None.ADPD
Distance From First Hole Centerline To End Along Width:
0.516 inches
MRC:
None.ADPN
First Recess Inside Height:
2.750 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.040 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Turnlock fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic

Similar Access Covers

« Commercial Hardware Catálogo
Comparar ahora»
Claro | Esconder