Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
12941478
NSN
Número de acciones nacionales:
TXT
Descripción:
Section Block Clamp
Código de nombre del artículo:
39404
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.190 inches and 4.310 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.560 inches and 0.680 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.342 inches and 0.372 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
Distance From Center Of Mounting Hole To Edge Along The Width:
0.312 inches
Center To Center Distance Between First And Second Mounting Holes:
1.375 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
0.625 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
4
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.560 inches all holes
Distance From End To First Mounting Hole Center:
0.969 inches
Distance From End To First Clamping Hole Center:
0.499 inches
Center To Center Distance Between First And Second Clamping Holes:
Between 1.360 inches and 1.390 inches
Center To Center Distance Between First And Third Clamping Holes:
Between 2.307 inches and 2.327 inches
Center To Center Distance Between First And Fourth Clamping Holes:
Between 3.235 inches and 3.265 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 or aluminum alloy 6063
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-A-200/8 T6 or T6511 federal specification 1ST material response or QQ-A-250/11 T651 federal specification 1ST material response or QQ-A-200/9 T5 federal specification 2ND material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
