Número de pieza 12576075

Plain Seal
Disponibilidad de stock  Códigos de condición del producto

Número de pieza 12576075 está en stock en las siguientes cantidades y condiciones.

  • NS: 1
  • NE: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 11/27/2023 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 121.26 and 163.701 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
12576075
Desmilitarización:
No
Vigencia:
60 mo.
Unidad de medida:
1 EA
NIIN:
012935340

Información de la pieza
Min hydraulic pressure 5000 psi temp: -65 degrees to 250 degrees f must perform for 10, 000 cycles with displacements of 36 inches and speeds up to 50 ft/sec must not cause appreciable wear on slding parts as determined by circumferential and longitudinal readings of surface roughness iaw ansi B46.1-85 and changes in dia

NSN
Número de acciones nacionales:
5330-01-293-5340 5330012935340
TXT
Descripción:
Plain Seal
INC
INC
Código de nombre del artículo:
04250
MRC:
The length of a straight line which passes through the center of the accommodation for the shaft,and terminates at the circumference.ABVM
Accommodated Shaft Diameter:
5.526 inches
MRC:
A measurement taken between the flat surfaces /front and back/ of the seal,in distinction from thickness.ADUC
Seal Width:
0.366 inches
MRC:
The length of a straight line which passes through the center of a circular housing bore,and terminates at the circumference.CPCW
Housing Bore Diameter:
6.000 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Two-piece
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Resin synthetic outer ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber carboxylic-nitrile-butadiene class xnbr inner ring

Similar Plain Seals

« Packing and Gasket Materials Catálogo
Comparar ahora»
Claro | Esconder