Número de pieza 12367263

Shaft Collar

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 63.16 and 85.266 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
12367263
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
014969115

Información de la pieza
Fmaterial: cres-type 303/304 per specification ASTVA276; collar is also coursely knurlled next higher assembly: p/n 12367223, throttle adjustment assembly - which is installed on an apu assembly p/n 12367094

NSN
Número de acciones nacionales:
3040-01-496-9115 3040014969115
TXT
Descripción:
Shaft Collar
INC
INC
Código de nombre del artículo:
13743
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
0.030 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.000 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.312 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.3110 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Recovery vehicle full tracked M88A1
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Unthreaded all holes
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the inside circumference,and the location.CRZW
Hole Diameter And Location:
0.0940 inches all holes
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel corrosion resisting
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round w/ single edge

Similar Shaft Collars

« Miscellaneous Power Transmission Equipment Catálogo
Comparar ahora»
Claro | Esconder