Número de pieza 12266714

Optical Element Spacer

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 1035.06 and 1397.331 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
12266714
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
010823536

Información de la pieza
Spacer-no 2, narrow angle objective lens finish: anodic coating type ii class 2, dyed black per MIL-A-8625; a hole 0.060 diameter through one wall located 0.150 from tapered edge establish length by measuring separation between ref sphere 1.0656 r and adjacent surface (ref r located 0.287 from adj edge used on M901

NSN
Número de acciones nacionales:
6650-01-082-3536 6650010823536
TXT
Descripción:
Optical Element Spacer
INC
INC
Código de nombre del artículo:
22261
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.3600 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
2.3600 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
2.5000 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.062 inches
MRC:
The length of a straight line which passes through the center of the largest portion of a tapered bore,and terminates at the circumference.ANAL
Taper Bore Major Diameter:
2.3030 inches
MRC:
The length of a straight line which passes through the center of the smallest portion of a tapered bore,and terminates at the circumference.ANAM
Taper Bore Minor Diameter:
1.9600 inches
MRC:
None.CSKC
Taper Angle:
26.5 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-A-225/8, T651 federal specification single material response

Similar Optical Element Spacers

« Optical Instruments, Test Equipment, Components and Accessories Catálogo
Comparar ahora»
Claro | Esconder