Número de pieza 12006420

Headless Grooved Pin

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 30.36 and 40.986 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
12006420
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 AY
NIIN:
010394645

Información de la pieza
Both undercuts chamfered at 45 degrees from undercut bottom on side towardsmiddle of pin has ring as handle in 0.190 in diameter hole ring 1.380 id from 0.120 in diameter wire

NSN
Número de acciones nacionales:
5315-01-039-4645 5315010394645
TXT
Descripción:
Headless Grooved Pin
INC
INC
Código de nombre del artículo:
02386
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.090 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.438 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
2.107 inches
MRC:
None.ABPA
Undercut Diameter:
0.360 inches
MRC:
None.ABPC
Undercut Width:
0.039 inches
MRC:
None.ABPD
Second Undercut Width:
0.039 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.190 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.305 inches
MRC:
None.AMCS
First End Taper Length:
0.040 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.140 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
38.0 rockwell c and 43.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches shank end
MRC:
None.CTHC
Second End Taper Angle:
30.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

Similar Headless Grooved Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder