Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
11bmt409
Información de la pieza
Three chucking lugs equallyspaced between ears and one undercut in the circular recesscentrally located between two of the chucking lugs
NSN
Número de acciones nacionales:
TXT
Descripción:
Access Cover
Código de nombre del artículo:
29785
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular recess
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
3.125 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.594 inches
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Between 3.746 inches and 3.748 inches
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
6.000 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.452 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Round multiears and holes
Body Radius:
3.250 inches
Inverted Radius:
0.250 inches
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
6
First Recess Inside Height:
1.015 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.375 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.188 inches
Outside Corner Radius:
0.500 inches
Body Outside Radius:
0.500 inches
Pilot Height:
Between 0.197 inches and 0.202 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
Inside Angle:
10.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron cast
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Ear axle differential, truck
