Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
11648745-1
NSN
Número de acciones nacionales:
TXT
Descripción:
Filler Opening Cap
Código de nombre del artículo:
30128
MRC:
Indicates the type of gripping accommodation used as an aid in the application of torque.ABEZ
Gripping Accommodation Type:
Lugs
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.750 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.285 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
3.750 inches
MRC:
Indicates the type of system in which the item is designed to be used.AGEJ
System For Which Designed:
Pressurized
Sealing Length:
Between 0.545 inches and 0.585 inches
MRC:
The number of cams included on the item.AGEX
Cam Quantity:
2
MRC:
Indicates the type of retaining device used to safeguard the item against loss.AGEZ
Retaining Device Type:
Chain
MRC:
A measurement of the longest dimension between the extreme ends of the retaining device.AJQT
Retaining Device Length:
Between 9.156 inches and 9.656 inches
MRC:
The means provided for relieving pressure from an item.ALGN
Pressure Relief Method:
Automatic
MRC:
The maximum working pressure at which an item is designed to operate.BPHD
Maximum Working Pressure:
14.000 pounds per square inch
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
Tighten remove slowly
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Any acceptable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Inside cam type w/ lugs
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-MIL-C-45167 specification (includes engineering type bulletins brochures etc that reflect specification type data in specification format excludes commercial catalogs industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical" "average" "" etc)
