Número de pieza 115467-21

Spring Tension Washer
Disponibilidad de stock  Códigos de condición del producto

Número de pieza 115467-21 está en stock en las siguientes cantidades y condiciones.

  • NS: 8
  • NE: 19
  • SV: 1
  • AR: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 06/23/2025 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 102.64 and 138.564 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
115467-21
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
010542576
NSN
Número de acciones nacionales:
5310-01-054-2576 5310010542576
TXT
Descripción:
Spring Tension Washer
INC
INC
Código de nombre del artículo:
15938
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.920 inches and 0.930 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.114 inches and 1.124 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.030 inches and 0.034 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.012 inches and 0.020 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 42.0 rockwell c and 48.0 rockwell c
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 631
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MIL-S-25043, cond a military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Spring tension

Similar Spring Tension Washers

« Nuts and Washers Catálogo
Comparar ahora»
Claro | Esconder