Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
11507566
NSN
Número de acciones nacionales:
TXT
Descripción:
Optical Element Retainer
Código de nombre del artículo:
22451
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.270 inches and 0.275 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 0.030 inches and 0.040 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.120 inches and 0.130 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
4
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
Between 0.270 inches and 0.275 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
Between 0.025 inches and 0.035 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
0.375 IN.-32
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
Between 0.025 inches and 0.035 inches
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Slotted
MRC:
The angular spacing between drive facilities,expressed in degrees.BMTN
Drive Facility Angular Spacing In Deg:
90.0
MRC:
The design of the guide on the item.BMTQ
Guide Design:
Thread relief
MRC:
Indicates the location of the guide on the item.BMTR
Guide Location:
Edge opposite drive edge
MRC:
An indication of whether or not an internal annular serration(s) is provided.BMTS
Internal Annular Serration:
Not provided
MRC:
An indication of whether or not a setscrew notch is provided.BMTT
Setscrew Notch:
Not provided
Hole Chamfer Angle In Deg:
0.0
Hole Chamfer Diameter:
Between 0.270 inches and 0.275 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel corrosion resisting
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Recessed
