Número de pieza 114R6055-17

Dust And Moisture Seal Boot
Disponibilidad de stock  Códigos de condición del producto

Número de pieza 114r6055-17 está en stock en las siguientes cantidades y condiciones.

  • NE: 2
  • AR: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 05/31/2022 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 364.12 and 491.562 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
114r6055-17
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
000552914
NSN
Número de acciones nacionales:
5340-00-055-2914 5340000552914
TXT
Descripción:
Dust And Moisture Seal Boot
INC
INC
Código de nombre del artículo:
19302
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
Waterproof
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
16.070 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.250 inches
MRC:
The number of mounting devices used as a means of attaching the item.ACUP
Mounting Device Quantity:
8
MRC:
The means by which the item is sealed.ACUW
Sealing Method:
Mechanical
MRC:
The length of a straight line which passes through the center of a base,and terminates at the outside circumference.AGQD
Base Outside Diameter:
9.750 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.BGKC
Opening Inside Diameter:
0.880 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cotton body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MIL-C-19002, type 1 military specification single material response body
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
77272-114R6055 drawing (this is the basic governing drawing such as a contractor drawing original equipment manufacturer drawing etc excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Head rotary wing

Similar Dust And Moisture Seal Boots

« Commercial Hardware Catálogo
Comparar ahora»
Claro | Esconder