Número de pieza 11447564-002

Shouldered Shaft

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 190.78 and 257.553 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
11447564-002
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
015096112

Información de la pieza
First end threads are 1.125-12 unf class 2A; shaft has two grooves - second groove is 1.130 inches from first end groove second groove diameter is 1.302 to 1.312 inches two unthreaded cross drilled holes located from step at second end 0.620 inch toward first end along length cross drilled holes are 0.182 to 0.192 inch diameter positioned 87.0 to 93.0 degrees apart around circumference; internal threads second end are 0.127-27 npt And intersect cross drilled holes second end is flatted two sides 1.080 to 1.120 inches across flats

NSN
Número de acciones nacionales:
3040-01-509-6112 3040015096112
TXT
Descripción:
Shouldered Shaft
INC
INC
Código de nombre del artículo:
22914
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved cross drilled hole and externally threaded
MRC:
None.AAHG
First End Groove Width:
0.1200 inches
MRC:
None.AAHH
First End Groove Diameter:
Between 1.0000 inches and 1.0150 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Flatted and internally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.610 inches
MRC:
None.AMCY
First End Distance From End To Groove:
2.210 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 1.3720 inches and 1.3730 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.1400 inches and 0.1500 inches
MRC:
None.AMDZ
First End Distance From Hole Center To End:
0.350 inches
MRC:
None.AMEA
First End External Thread Length:
2.210 inches
MRC:
None.AMFN
Second End Flat Depth:
Between 0.3780 inches and 0.4190 inches
MRC:
A measurement of the longest dimension of the flat at the second end,in distinction from width.AMFP
Second End Flat Length:
0.620 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.4980 inches and 1.4990 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the second end.AMHP
Second End Internal Thread Length:
2.850 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 1.498 inches and 1.499 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches

Similar Shouldered Shafts

« Miscellaneous Power Transmission Equipment Catálogo
Comparar ahora»
Claro | Esconder