Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
1128bm45010-13
Información de la pieza
Front face diamond knurl medium pitch no epoxy primer top edge angled to 1.460 in 2.400 in From left end all holes 0.560 in From bottom edge to centerline left edge radius 0.960 in From base to c/l right edge radius 0.820 in From base to c/l
NSN
Número de acciones nacionales:
TXT
Descripción:
Plate Spacer
Código de nombre del artículo:
26979
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.3125 inches and 0.3155 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.110 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.490 inches and 1.550 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 0.624 inches and 0.633 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.040 inches and 0.060 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 1.490 inches and 1.510 inches
Side Radius:
Between 0.290 inches and 0.350 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 301
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MIL-S-5059 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate and plastic epoxy and primer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
MIL-S-5002 military specification 1ST treatment response and MIL-P-23377 military specification 2ND treatment response and MIL-S-5002 military specification 3RD treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/o radius
