Número de pieza 111X00412X2004

Annular Ball Bearing

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 41.38 and 55.863 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
111x00412x2004
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
001982926

Información de la pieza
Spressed stainless steel retainer heat treat parts per MIL-H-6875; immediately after quenching refrigerate parts at minus 120 to minus 90 degrees f for 2 hours followed by tempering at a temp of plus 325 degrees f for 3 hours repeat refrigeration and tempering steps at least once final hardness should be rockwell C-58 min FF-B-171 applies except for bearing type and dimensions all other attributes of this bearing are i/a/w FF-B-171 qap EQ003 applies source inspection required

NSN
Número de acciones nacionales:
3110-00-198-2926 3110001982926
TXT
Descripción:
Annular Ball Bearing
INC
INC
Código de nombre del artículo:
00014
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.2812 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.2500 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
0.7500 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Pressed
MRC:
The number of shields included on the item.AGYK
Shield Quantity:
2
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Radial
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The designation specifying the type of fit as recognized by industrial and governmental agencies.AGZH
Internal Fit-up Designation:
Standard
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec NO.3
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Pressed stainless steel retainer heat treat parts per MIL-H-6875; immediately after quenching refrigerate parts at minus 120 to minus 90 degrees f for 2 hours followed by tempering at a temp of plus 325 degrees f for 3 hours repeat refrigeration and tempering steps at least once final hardness should be rockwell C-58 min FF-B-171 applies except for bearing type and dimensions all other attributes of this bearing are i/a/w FF-B-171 qap EQ003 applies source inspection required
MRC:
The chemical compound or mechanical mixture properties with which the item is lubricated.LBMA
Lubrication Material:
Grease
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
MIL-G-23827 military specification single material response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-loading groove non-separable

Similar Annular Ball Bearings

« Bearings Antifriction Unmounted Catálogo
Comparar ahora»
Claro | Esconder