Número de pieza 1098PIECE2

Sleeve Bearing

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 1451.8 and 1959.93 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
1098piece2
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
012185803

Información de la pieza
Eight antirotation holes 0.190 IN.-24NC-2B thread countersunk 0.500 in Deep 0.210 in Diameter by 90.0 degrees on 14.875 in Diameter bolt circle twelve 0.4063 in Diameter holes cbore 0.5938 in Dia 0.500 in Deep on 14.750 in Diameter bolt circle

NSN
Número de acciones nacionales:
3120-01-218-5803 3120012185803
TXT
Descripción:
Sleeve Bearing
INC
INC
Código de nombre del artículo:
13205
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.1900 inches first
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.4063 inches second
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
13.8750 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
13.5000 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
12.7500 inches
MRC:
None.AGFH
Left Internal Flange Hole Diameter:
Between 12.5430 inches and 13.5460 inches
MRC:
None.AGFJ
Right Internal Flange Hole Diameter:
Between 12.5430 inches and 12.5460 inches
MRC:
None.AGFK
Left Internal Flange Width:
4.5000 inches
MRC:
None.AGFL
Right Internal Flange Width:
6.2500 inches
MRC:
None.AGFQ
Left Flange Outside Diameter:
15.7500 inches
MRC:
None.AGFR
Right Flange Outside Diameter:
Between 13.7470 inches and 13.7490 inches
MRC:
None.AGFS
Left Flange Width:
0.8750 inches
MRC:
None.AGFT
Right Flange Width:
4.5000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.AGKH
Lubricant Accommodation Style:
Grooved circular
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round left flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round right flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square left flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square right flange outside left corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches inside diameter surface of body
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter surface of left flange
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter surface of right flange
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
20 hole
MRC:
Indicates the location and number of grooves on the surface of the item.CTMQ
Surface Groove Location And Quantity:
4 internal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 903
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-C-390 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
18C-3 solid external flanges both ends internal flange at both ends

Similar Sleeve Bearings

« Bearings Plain Unmounted Catálogo
Comparar ahora»
Claro | Esconder