Número de pieza 101A726AYP21N702

Plain Tapered Pin

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 141.68 and 191.268 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
101a726ayp21n702
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
001095631

Información de la pieza
Drilled countersunk and tapped on concentric center line from radiused end 0.290 in Drill 1.125 in Deep countersunk 90.0 degrees to 0.562 in Diameter and tapped 1/2-13 NC-3 0.625 in Deep

NSN
Número de acciones nacionales:
5315-00-109-5631 5315001095631
TXT
Descripción:
Plain Tapered Pin
INC
INC
Código de nombre del artículo:
02391
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Oval
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Square
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
6.172 inches
MRC:
A standard or measurement,expressed as a numeric value,for designating the size of the pin.ACHV
Pin Size Designation:
6/0
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
42.0 rockwell c and 46.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Large end
MRC:
None.CSKM
First End Outer Radius:
1.516 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches both ends
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches long shank
MRC:
The amount of taper measured parallel to the longitudinal axis of the pin per measurement scale.CWGB
Pin Taper:
0.0250 per foot in inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130

Similar Plain Tapered Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder